Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
A field engineer once asked me: “This demulsifier works perfectly on our heavy crude in Latin America. Why would it struggle at a facility in the Middle East?” Because crude is not a product. It is a fingerprint — and…
What are crude oil demulsifiers ? What are their characteristics? The mechanism of crude oil demulsifiers is a phase transfer-reverse deformation mechanism. After the addition of a demulsifier, a phase transition occurs, meaning it can generate a surfactant of the…
The commonly used nonionic demulsifiers in oil fields are mainly as follows: 1. SP type demulsifier The main component of SP-type demulsifier is polyoxyethylene polyoxypropylene octadecyl alcohol ether, with the theoretical structural formula R(PO)x(EO)y(PO)zH, where: EO – polyoxyethylene; PO –…
Because some solids are poorly soluble in water, when one or more of these solids are present in large quantities in an aqueous solution, they can exist in an emulsion state under hydraulic or external agitation, forming an emulsion. Theoretically,…
Demulsifiers are surfactants that disrupt the structure of emulsified liquids, separating the different phases within the emulsion. Crude oil demulsification refers to the use of demulsifiers to chemically separate oil and water from an emulsified oil-water mixture, achieving crude oil…
Demulsifiers are surfactants that break down emulsions. They primarily disrupt emulsions by partially replacing the stabilizing film. As dehydrating agents, they remove water from crude oil and heavy oil, achieving the required water content. In oil wells, they reduce crude…
The application of emulsifiers in oilfields spans key stages such as drilling, oil production, gathering and transportation, and storage. The emulsification requirements vary significantly across different scenarios, necessitating the selection of specific emulsifier types and formulations to achieve precise control.…
The introduction of salt-based ternary peptides into the incoming liquid caused difficulties in handling the new 3-1 solution. While the problem of salt-based ternary peptides and polymer-based peptides was solved by introducing a patent, the dosage was still relatively large.…
The oil recovery process of an oil field usually includes three main stages: exploration, development and production. 1. Exploration phase: Geological exploration: Geologists and geophysicists search for geological structures that may contain oil through methods such as geological surveys and…
Demulsifier is a chemical substance that can destroy and disperse the oil-water emulsion, separating it into two phases. Demulsifier, this chemical additive is not unfamiliar in the oilfield industry, it can destroy and disperse the oil-water emulsion, and separate it…